Link Next Unpitched Slide

[CommandoAir]

I'm making a custom, and it's all going good except for one thing:

 

The song ends with a slide out downwards. The first time around, I just charted it as one big un-pitched slide, but there's a small vibrato sustain before the note actually starts sliding out, and it isn't re-picked.

 

I've got it charted as so:

 

D String 16th fret (vibrato + link next) → Un-pitched slide to 0 

 

The problem is, this shows the first note (the vibrato) fine, but the slide at the end doesn't show up at all.

 

Surely it's possible to link next to an un-pitched side. I'm sure I've seen cases where it would have been impossible without it. Am I doing something wrong? Or is this just a bug?

 

If needed, I can post screenshots and/or the _p.psarc file.

[Rockfirstlast]

Change it to this and see if you like it:

 

D String 16th fret (vibrato + link next) → D String 16th fret with unpitched slide to 1 (don't forget to add a bit of length to this note with the ] key or mouse scroll up)

[CommandoAir]

Change it to this and see if you like it:

 

D String 16th fret (vibrato + link next) → D String 16th fret with unpitched slide to 1 (don't forget to add a bit of length to this note with the ] key or mouse scroll up)

Didn't work, I also tried setting it to 2.

 

I'd like to make a correction, it doesn't show an open note as the slide note, it just doesn't show the note at all.

[firekorn]

Could you share a screenshot of that section in EOF?

[CommandoAir]

Could you share a screenshot of that section in EOF?

http://i67.tinypic.com/qnjomu.png

[firekorn]

Do you use DDC? If so can you share the result without using it?

 

Also the crazy status on the note isn't needed and i wouldn't recommend to have the vibrato status on the slide since i doubt any guitarist ever do both at the same time but it shouldn't cause any issue.

[CommandoAir]

Do you use DDC? If so can you share the result without using it?

 

Also the crazy status on the note isn't needed and i wouldn't recommend to have the vibrato status on the slide since i doubt any guitarist ever do both at the same time but it shouldn't cause any issue.

I don't use DDC

Removed crazy note, I don't know how that got there

Vibrato removed, didn't really think about that when I put it on

 

Still the same issue. No note shows.

 

Edit: I just tried a work-around where I terminated the first sustain note with another link next note (without vibrato) but that just put an open note with a tiny sustain tail on the end.

 

As a side note, scroll speed in the RS toolkit doesn't seem to make a difference either.

[Rockfirstlast]

 

Do you use DDC? If so can you share the result without using it?

 

Also the crazy status on the note isn't needed and i wouldn't recommend to have the vibrato status on the slide since i doubt any guitarist ever do both at the same time but it shouldn't cause any issue.

I don't use DDC

Removed crazy note, I don't know how that got there

Vibrato removed, didn't really think about that when I put it on

 

Still the same issue. No note shows.

 

Edit: I just tried a work-around where I terminated the first sustain note with another link next note (without vibrato) but that just put an open note with a tiny sustain tail on the end.

 

As a side note, scroll speed in the RS toolkit doesn't seem to make a difference either.

 

 

Scroll speed speed should be noticeable.  Change it to 0.8 and it SHOULD be super fast.

[CommandoAir]

 

 

Do you use DDC? If so can you share the result without using it?

 

Also the crazy status on the note isn't needed and i wouldn't recommend to have the vibrato status on the slide since i doubt any guitarist ever do both at the same time but it shouldn't cause any issue.

I don't use DDC

Removed crazy note, I don't know how that got there

Vibrato removed, didn't really think about that when I put it on

 

Still the same issue. No note shows.

 

Edit: I just tried a work-around where I terminated the first sustain note with another link next note (without vibrato) but that just put an open note with a tiny sustain tail on the end.

 

As a side note, scroll speed in the RS toolkit doesn't seem to make a difference either.

 

 

Scroll speed speed should be noticeable.  Change it to 0.8 and it SHOULD be super fast.

 

Ah! I was under the impression higher number means faster. I'm pretty sure there's even a multiplication symbol in there.

[CommandoAir]

Could my software versions be affecting it?

 

I'm running:

Rocksmith Custom Song Toolkit (v2.8.0.0-3d133c61)

Editor on Fire (v1.8RC11)

[firekorn]

@@CommandoAir oh indeed, didn't think about this.

 

It might be related to what cause the chord glitch issue see there : http://customsforge.com/topic/37422-weird-graphical-error-with-chord-diagrams-on-rs2014/

[CommandoAir]

Updated to RS toolkit 2.8, and EOF 1.8RC12, but still the same issue. 

 

Those threads mentioned something about Abridged_RS2 causing graphical issues, but I didn't see anything to do with that in the Import/Export menu like it said.

 

Also, the EOF post mentions something about tech notes and unpitched slides. Maybe instead I have to use a single, unpitched slide note, and use the tech mode to set where it starts the slide? I don't know, I've never used tech view.

[firekorn]

@@CommandoAir are you sure you also applied the latest hotfix (second link there customsforge.com/topic/1529-latest-eof-releases-5-3-2017/ )

 

And for the toolkit it's strongly suggested to use the beta release instead of the stable one right now.

[CommandoAir]

@@CommandoAir are you sure you also applied the latest hotfix (second link there customsforge.com/topic/1529-latest-eof-releases-5-3-2017/ )

 

And for the toolkit it's strongly suggested to use the beta release instead of the stable one right now.

Seems to have worked perfectly, even with abridged on. Thanks a bunch ;)