Jump to content

ShrillBear52

Member
 View Profile  See their activity

  • Posts

    619

  • Joined

  • Last visited

  • Country

    Hungary

  • Donations

    0.00 USD 

 Content Type 

Everything posted by ShrillBear52

  1. ShrillBear52
    Keep in mind that process does work and that other people do it. Based on the screen captures, you may have authored consecutive chords in different handshape phrases instead of the same one. This feature is designed to have several notes/chords in one handshape phrase, so that one handshape animation is reflected for all of those notes in Rocksmith. If you select all of the notes/chords that should be in one handshape, you can use Note>Rocksmith>Handshape>Re-mark to combine them into a single handshape phrase. That note on the E string extends over a phrase change. This has the possibility of causing issues depending on how dynamic difficulty is authored. You can use the "Manage RS phrases" dialog to add a difficulty level for the selected phrase. The new difficulty level is added ABOVE the current difficulty that you have displayed, so simplify the current difficulty of the phrase a little bit by closing the "Manage RS phrases" dialog doing something like removing notes or removing one or more strings from chords. Then when you go back to "Manage RS phrases", the difficulty number shown for the phrase should have increased. I know that I should use this method,but it's sounds complicated to me and I just don't understand it. Don't know,is that normal to mark with a handshape tag and also with a sustain one?? I tried this method to select all the notes I want,mark them with the handshape tag,and press down to T key for them,but in my result id didn't endid up very nicely,my guess whould be there is something that I don't keep in mind about them,chould you show a demonstration with one-two pictures,so maybe I chould understand it?(like,one picture shwos eof and the other shows the look in rocksmith) I just knew that this will be the issue,but the problem with it is there aren't any green arrows where I chould place different event names.So I realy have to learn this other method for syncing. Again,It's just complicated to me how to to all this,(will try this again later)
  2. ShrillBear52
    1.)That is not an arpeggio mark,it's a handshape one,and that is here,because the chord "sustain" or "let ring out" part whould be shorter then it should.(that's why I markd with a sustain and handshape tag)(Is that normal to to both anyway???) 2).I see,and can I do anything about it or just leave it,bacause it will not mess in the section parts? 3).I know I should learn a new method to syncing the songs,but that method just not worked for me that I red earlier.Maybe I misunderstood something. 4).I just want to make official quality DD for my works,(most for the messd up section parts)
  3. ShrillBear52
    No,that didn't work for me,but nevermind,I already started a new project for the song and I mostly done with everything.But I just got 2 new messages from EoF. This one is probably about a sustain chord: http://www.kepfeltoltes.hu/160505/Screenshot_2016-05-05_15.55.04_www.kepfeltoltes.hu_.png This one is probably about the sections: http://www.kepfeltoltes.hu/160505/Screenshot_2016-05-05_15.55.08_www.kepfeltoltes.hu_.png (btw,I still don't understand how do I suppose to change the numbers,to get different difficulties.I under stand that I have to go to manage rs pharses,but after that,what???)
  4. ShrillBear52
    So how can I solve it?????? Start the whole project again or what?
  5. ShrillBear52
    Nothing has changed, you're going to need to give more specific information, such as the exact name of the GP file because your folder had several of them if I remember correctly. And if you cannot reproduce the problem, there's probably nothing for me to fix. It's not obvious what you're trying to say. "Moves away" indicates that you are clicking and dragging the note that you are trying to select. EOF will allows this to happen, but depending on your mouse's settings and the accuracy of your hand movements, it may not be what you intend to do. If you don't want to move notes on accident, you can disable it by selecting the "Disable click and drag" option in the Song menu. You can select that menu option again later if you want to re-enable the ability to click and drag notes. http://www.filedropper.com/2016-05-02-2047-58 see for your self,same project file name,same guitar pro,same track,same problem.
  6. ShrillBear52
    This won't demonstrate a problem. You'd have to post a Guitar Pro file that imports incorrectly, otherwise it's likely that you altered the notes after import, and that wouldn't be a problem with EOF. The way we have suggested to beat sync is recommended. It's rarely appropriate to move the notes instead. When you open the Help menu and choose "About", what version does it say the program is? Please clarify what you mean when you say "it moves away". If you click on a note and then move the mouse while the left button is held, you can move notes. If grid snap is enabled, it's harder to do this on accident because you would have to click and drag a certain amount to actually move the selected notes. The guitar pro file wich I import is the same,that you can find in that folder what I sent earlier. about the about part:(this is a diffrent song in the picture,so don't give any attention to it,just read the message) http://www.kepfeltoltes.hu/160502/Screenshot_2016-05-02_19.54.57_www.kepfeltoltes.hu_.png Whan I meant for the last part is when I just "simpli" click to ANY note in the program there is a 95% chance that the note(where I clicked) are will move away. Edit:just realized that this is not the latest version,so I will update it now,but just look at it.
  7. ShrillBear52
    I'm afraidit's a bit late to do all this for an already created song.Besides,when I creat a new song,the first thing what I do,is set the correct bpm.After that I import the tabs,(usually they match with the wavegraph).If not,then I just move those green arrows from the beginning.(that's works for me)but in this case,this part is not imported correctly for no reason (ONLY THIS PART,inside this just 2 chords and 1 legato wich are not imported correctly.)
  8. ShrillBear52
    Here is a link for an eof project file with the wrong import in it.I forgot to mention something,I'm not always moving the beat marks if those not match the wavegraph's rhythm,I often just select all the notes and move them to match the wavegraphs. About the dissapearing wavegraph:I have the latest version of EOF but every time I press Ctrl+Z,the graphs dissapears. For last:I just noticed the mouse in EoF is very sensitive,most of the time when I accidentally miss click to a note,it moves away.Is that normal? It kinda annoys me.
  9. ShrillBear52
    I moved the notes of course,but this had to be done,because if I just simply import it,it doesn't match to the wavegraphs and not syncd(mostly because of the leading silence in the beginning).Also If I just simply import is without moving the notes,it still give me this result for no reason.It whoudn't be a problem,after all eof not always import all the notes/chords correctly and the creator of the song has to sync it by his/her own.Unfortunately I can't move the bars in this case to be sync as it should be.
  10. ShrillBear52
    This is how it import to me the "new edited" guitar pro tab for me(This is the third pre chorus after the solo part) http://oi66.tinypic.com/2wmfaea.jpg
  11. ShrillBear52
    2.Just the eof projec file??? uhmm,nevermind here is the dowland link for the folder(archive). 7.What I meant by "I'm lost" is I don't know how to use it,I understand it there are numbers,but how can I edit/change them? By the way,I don't know anyone has said this before,but I noticed when I press Ctrl+Z to undo a previous change the waveform graph is dissapear. And also,after the solo part eof quites mess the prechorus part,didin't had problem with this song before.
  12. ShrillBear52
    1.)I knowd there is a dirrefence bettwen those 2.What I don't know is how to mark the "handshape".How can I mark the chords as "crazy"? Selecting the notes/shords and press the "T" key to them not do it properly.Still has handshape parts where it should and where it not should be. 2.)I demonstrate with this picture then: http://oi63.tinypic.com/67mr5z.jpg 3).Why whould be any misssing slides/bends in the chart if I put DD on them before I play them first?(Still don't understand how this is working. 4.)Look at the the picture,where is a red circle(kind of circle) you can see,there is an ugly "bug". http://oi65.tinypic.com/20pu2bq.jpg 7.) I thought I understand this part,I did,before I red the "EOF will change the difficulty names into numbers when you use this function, and if you use the option to display RS sections+phrases at the top of the piano roll (in File>Preferences), EOF will color code the phrase names to show when a phrase is empty on this difficulty level (blue), is the highest difficulty level for this instance of the phrase (green) or is not the highest difficulty level for this instance of the phrase (red)." part. What am I suppose to do with the numbers in manage RS pharses part?????
  13. ShrillBear52
    Just a wild guess,but try to restore your default settings maybe? I had familiar issues before,and that kinda solve the problem for me.(not sure if it will solve your one,but just try it)
  14. ShrillBear52
    1)I see,but is there any difference between this normal sustain like this: http://oi68.tinypic.com/sq4dxh.jpg and between this:? http://oi63.tinypic.com/2qcmd6q.jpg And how can I remove the sustains from those chords where it shouldn't be? Or am I suppose to go to those chords,and remove the "sustain" mark from it ,if there is? (I'm not so sure about it,that's why I asking) 2)You misunderstandit my question here you can dowland this song for an example,and look at the section parts in RR.What I meant To wrote,is the solo part are beginning earlier with the last chords of the previous part(In this case from the second chorus) 3)I understand the part,where you said skip the use DD part,and just import it into the ToolKit,and convert is,then just try it in the game.But I don't understand,why it didn't export the slides,and bends.What's the deal with this? 4)What I meant,was this in this picture.I understand it,that I should use the handshape instead(I use handsahpes,but not in this song),but I like this design to use in the case :P http://oi65.tinypic.com/2pphbo2.jpg 9)What I was trying to say,is that there are no "loading time" in official songs at the end.So when you playd the last part of ot,it immediately shows the scores and so on.
  15. ShrillBear52
    First off,thank you for send this video to me,I found the best way to restring my guitar and it's awsome! :D Second,yes the tech didn't changed any of the string,he leaved the same strings on the Les Paul.That's not realy,how a "proffesional" should do(IMO).My G string has just broke,so I'm going to buy a new pack of strings and a pegwinder.What brand of strings whould you reccomend?? In my thoughts,I whould realy like to try out Dean Markley strings,or Clear tones(this brand has a very good new in nowdays)Unfortuneatly,this case can be,that there are no Cleartone strings,in that guitar store.However,they must have Dean Markley.because I was 1 or 2 pack was on the counter.If they also don't have this strings,then I decided to try Elixir strings(I heard this one is also good)What do you think about it?
  16. ShrillBear52
    I will try to make it understandible as I can.I know you(maybe) said how to solve these problems,but if those answers whould work,I don't write another topic again. 1) My problem(wich is a most common one) are the sustain lengths. I don't know,why are these alway appering,and I can't do anything with them. Like this one here:http://www.kepfeltoltes.hu/160413/20160413214034_1_www.kepfeltoltes.hu_.jpg The problem with these sustain are not in the length they should be(In Eof,they're fine,but in the game it's bad) This sustain is to short,(compared to the other picturewich is shown in EOF) http://www.kepfeltoltes.hu/160413/20160413213142_1_www.kepfeltoltes.hu_.jpg And this one is to long (this is not how it suppose to be) http://www.kepfeltoltes.hu/160413/Screenshot_2016-04-13_20.39.24_www.kepfeltoltes.hu_.png http://www.kepfeltoltes.hu/160413/20160413155940_1_www.kepfeltoltes.hu_.jpg How can i PROPERLY set the lengths,to not geth this ugly results? (Moving the mouse whell is NOT WORKING,i tried it many times,and still not changed the lengths in the game) 2) These is start to be a new problem to me,the sections are not good.What I mean in 'not good',is that they don't fit to the beats in the game.I markd the into,verse,chorus,etc. parts in EOF,but in Rocksmith,eg:When the solo part suppose to start (in RR) it's starts earlier,and ends it earlier.(The solo part is beggining with the G#5 power chord part (Drop D tunning),but this chord suppose to be the last part for the interlude,and the earli end is,when the last Double stop slide is not in the solo part,it markd as the first part of the last chorus.I don't know if the is a common problem as well..How can i Cure this problem?? It anoys me as hell! 3) This is another anoying problem,slides and bends are not exportit to the XML.guitar files,how can I properly set this to be good and export as well?? (I tried the method,that GetTheLedOut wrote,but it had this result) http://www.kepfeltoltes.hu/160413/Screenshot_2016-04-13_20.39.03_www.kepfeltoltes.hu_.png http://www.kepfeltoltes.hu/160413/20160413213035_1_www.kepfeltoltes.hu_.jpg 4)How can I cure this very ugly looking arpeggio marks to not be this bad?? http://www.kepfeltoltes.hu/160413/20160413214422_1_www.kepfeltoltes.hu_.jpg How can I setup these frethand mutes to be the same,for some reason they both are different(one is markd as F5 power chord mute and the other is markd as the open E and A string mute.) http://www.kepfeltoltes.hu/160413/20160413160346_1_www.kepfeltoltes.hu_.jpg http://www.kepfeltoltes.hu/160413/20160413160328_1_www.kepfeltoltes.hu_.jpg 6) How can I remove chord names(sorry,if this has ben descused before,my memory is not so good..Like a 2 bit golden fish lol) 7) How can I make Official DD to CDLCs?? Is there any guide to how do do it or video about it??? 8)How can I set the preview audio files,to have a fade out part in the end??? 9) And for last,is there any way to set the song to have no loading time in the beginning and in the end??? I'm just trying to make my Customs makeing to a new level :D Thanks,for the helps and tips so far,i don't know where whould i be without you :) If something is not clear,then please tell me about it! Thanks!
  17. ShrillBear52
    Wow,thank you,I will definetly buy a new set of strings,and I will leave some place to the strings when I mounth them.It kinda explains the buzzing,because I didn't gave any attention for this.Also, I'm not willing to buy Earni Ball or Ddario strings anymore,they both sucks. :P
  18. ShrillBear52
    Well it's been a while,but I tookd my Les Paul to a guitarstore,they said they 'madi it',the guitar's set up,I even payd 11 euro(3500 Ft) to them for the work,but I will fucking hang my self with the guitar strings!!!!!! IT'S FUCKING SHIT,the buzz is so bad,that it hurt my ear a lot,even in standard tunning,but i tunned down to Drop D flat,and tha buzz it's not strin (or fret,whatever) buzz anymore,it's fucking earbleeding.And I can't change the stirng height,because it will make the playing uncomfortable again,and I don't even want to touch anything for example:the trus rod,the string height,the pickups and so on... Just saying,about the courrent situation
  19. ShrillBear52
    Green Day Billy Talent Godsmack Red Hot Chili Peppers Breaking Benjamin Pink Floyd Dethklok System Of A Down Alice In Chains A Day To Remember Metallica AC/DC My main favs! <3 Perhaps you find yours in these too.
  20. ShrillBear52
    Lose the strings? Well that's intresting,i heard in a few videos that i have to leave the strings in tunning,in order to make the trus rod,and it will keep the settings,also i do not think i should lose te trus rod,I'll try to make another video for it,to see what i'M talking about. What I meant is that the tension of the strings may be causing the truss rod to be difficult to turn. You don't HAVE to loosen them in order to adjust the truss rod. I do, because I'd rather not cause the extra stress on my neck. Why do you think that you don't have to loosen the truss rod? What is the shape of your neck right now? Which way does it bend? I meant,for when you turn the hex key in it,you chould lose or tie the neck,i will show in another video in the morning what i'm talking about. You'll want to turn it to the left, or counter-clockwise if you are looking into the hole where the truss rod is. If you are going to take a video or a picture, it would be helpful if you use the same angle as the picture of your string height. Showing all the way from the nut to the bridge - and let us know if the video was taken before or after you've adjusted the truss rod. First sorry that i promised the videon in the morning,but I only had now the chance to record it,in the video i showd how high the strings are(just a look at the fretboard) and then the nut again,and then how it looks like a bending right now,and I was that stupid,that i tied the trus rod more at some point,but if I remember right,the last time I losed it more,hope it can figure it out in the video,and now 2 off topic questions if you don't mind :P first ,i get this message in eof wich tells me,that 'at least one slide note doesn't define it's ending positions.Unless you define this information,they will export as 1 fret slides.' and another wich tells me,that one slide positions has an error in the end position,and it will not export as a slide.I usually get this messages,but I ignord them as well,my question whould be how to set up the ending position? Cause every time i set it to end ending fret,it always give me the same warning about this.And for las how can i make DD like in official DLCs has? Or is there any guide to do it? I hope these not a big deal and Thanks! The video: http://www.filedropper.com/mov0054
  21. ShrillBear52
    Lose the strings? Well that's intresting,i heard in a few videos that i have to leave the strings in tunning,in order to make the trus rod,and it will keep the settings,also i do not think i should lose te trus rod,I'll try to make another video for it,to see what i'M talking about. What I meant is that the tension of the strings may be causing the truss rod to be difficult to turn. You don't HAVE to loosen them in order to adjust the truss rod. I do, because I'd rather not cause the extra stress on my neck. Why do you think that you don't have to loosen the truss rod? What is the shape of your neck right now? Which way does it bend? I meant,for when you turn the hex key in it,you chould lose or tie the neck,i will show in another video in the morning what i'm talking about.
  22. ShrillBear52
    Lose the strings? Well that's intresting,i heard in a few videos that i have to leave the strings in tunning,in order to make the trus rod,and it will keep the settings,also i do not think i should lose te trus rod,I'll try to make another video for it,to see what i'M talking about.
  23. ShrillBear52
    The only problem with the trus rod, is doesn't realy want to move in any direction,so i stucks this point currently,also i lowerd the pickups because in my experience it caused some string buzz especially on the G string,but now in others to exepct the B and high e string again.But I'll to set the trus rod again,see if theres any change now.Also i think i should tie the neck,because it's more than just uncomfortable playing it's unplayable. Edit: I succsed to MOVE the trus rod,but it was very hard to do,is that normal?
  24. ShrillBear52
    As @@GetTheLedOut askd,i did another topic to help me at setup my Les Paul.First off,i whould like to tell,that i'm not competely an idiot,I just make decisions quickly and not think about it at once,that's why i started topics often maybe a 2-3 months ago,and then i realised,that your might think of me an autist and you're tired to help me any had enough about it,and i just stopd makeing topics often,after that,I only wrote topics,when i feeld it has to be write on now.....So you have to forgive me :D Now get to the Guitar Set up informations: -I have problems with my Strat and my Les Paul,but let's solve the Les Paul problem,because it's bigger and it semms,that the strat.only need a nut change. -I can't make not bad quiality pics.because my phone has not have a very good camere(or just can't make this pic,for some reason) but get back to the point,I measured the height on the 12th fret,and it's 2mm,i set it to 2mm,because i heard in a video where the guy said,it has to be 2mm. -I have picture about the bridge,the fretboard and the nut. I hoep you can see the pickup also in the bridge picture. If i messd something pleas let me know then i will make another picture, and Thanks! http://oi65.tinypic.com/2lmuccw.jpg http://oi64.tinypic.com/2z4hi54.jpg http://oi66.tinypic.com/72b03q.jpg
  25. ShrillBear52
    You can see for your self,i tried to do the press the strings while play them open,not sure if you chould judge about it how i did it in the video(the stratocaster) in the other video i hope you can hear how to first 4 string are buzzing while open ,expct the B and high e,(the les paul) http://www.filedropper.com/mov0053 http://www.filedropper.com/mov0055 Well, that not what I meant at all. I meant this. In any case, it was pretty clear that your nut is cut VERY deep (on your "Stratocaster" from the factory. The strings are basically resting right on the first fret. That's where the buzzing is coming from. I can't see how much relief your neck has, but if it's too straight, it will only make much the buzzing worse. After following the tutorial completely, you may still find that you'll need a shim in your nut, or to have it replaced. The second video (your Les Paul) wasn't helpful at all. We would need to see the nut, the height of the strings at the 12th fret, and the height of your bridge (at both ends) to diagnose the problem. Since you think that the truss rod is broken on your strat, let's just focus on your Les Paul for now - one guitar at a time :) . Using the tutorial from a few posts back, follow and execute EACH step. Still doesn't seem like you've done this. If you still have questions AFTER FOLLOWING THE TUTORIAL, then start a new thread (this one was/is supposed to be focused on music theory) in the help section that includes very specific details, like measurements of the height of your strings at the 1st, 12th, and last frets (or pictures that show string height or neck straightness). Pictures like this, this, and this would be helpful. Did I mention to follow the tutorial first? Just making sure. :D Please don't look me an autist,but i don't know what are you talking about when you mentioned 'Well, that not what I meant at all'. I Pressd the string behind the nut,while i playd them open,you wantid this right? And yeah,maybe i should start a new topic about guitar set up, i just afraid to do another because i made so many in the past XD
×
×
  • Create New...

Important Information

By using this site, you agree to our Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. - Privacy Policy