ShrillBear52

So i have a problem with my Stratocaster,you can hear it in the video(hope you can and it's not bad),the Low E and A string is buzzing in the open notes.I even tighted the neck,and the problem is still.Can anyone give me a guide to solve this problem?I think the main problem is with the nut,because if only 2 string is buzzing then the problem is not with the neck,but i'm not sure about it!

http://www.filedropper.com/mov0015

I was being happy man, "tryer" is good :D

 

You must make mistakes to learn.  A lot of people give up but you keep trying.  Keep going :D

 

 

And yes, picture is not good.  Make picture from end of EoF?

Sry about that m8, i was nervous to not fail any subject XD (high school is tough)  but now i'm fine, and here is the picture from the end, i don't know how much will it change the situation    http://oi63.tinypic.com/vy163d.jpg

 

Ctrl+~ , Ctrl+#, Ctrl+Fn #, Ctrl+X:

 

Changes the fret number for all gems of all selected notes to 0 (Ctrl+~), 1 through 10 (Ctrl+1 through 0), or 11 through 22 (Ctrl+F1 through F12), or X (Ctrl+X, to denote string mutes).

 

I wouldn't go using Ctrl+X too often, that's the destructive "set fret to 0 and make it a mute" version.  I think you want Shift+X to retain the fret value.

 

 

And Shrillbear, you are a tryer :D

 

I can't understand half of your problems because I don't know if its a problem with the software, your English or you...  it's usually you :lol:

 

Anyád? Yes english is not my native language,also i was nervous as hell in this week,but now i'm not finaly! and what i said before,there was a PROBLEM with the audio in the Rhythm track(it was quite) i didn't changed anything at all in the settings since,but albatross said,the volum with both Rhythm and Lead tracks is the same,but in my game it diffrent.Also what i have problem with is the sustains length in THE GAME ITSELF.In EOF it's a normal sustain,but in Rocksmith itslef,it's SHORT.Don't want to start an argue about it,it would just spoil my day :P 

http://oi64.tinypic.com/2l9gsnl.jpg

http://oi68.tinypic.com/v8lijs.jpg

Played a bit of both paths and the song volume sounds the exact same to me. Not sure why (or even how) they could sound different for you.

Well,it seemd that the Rhythm part was quiter than the Lead part but now they kind of the same volume,Thanks,but unfortunetly there is 1 problem still,the sustains length have been not changed in RS,altrough i edited them in EOF,don't know why.

@@ShrillBear52 -

 

The song volume is the same for all paths since you can only use one song file per .psarc. The volume of what you play on each path can change depending on the tones and tone volumes that you have for the different paths. It looks like the two paths use the same tones except for the Filter and Filter_Lead being used on lead, so the parts that use the same tones should sound the same in both paths. Are you saying they're not, or is the distortion tone (which I'd guess would be pretty loud based on the settings, especially for a song volume of -7, though I haven't played it yet) just used much more on the rhythm path?

I used the same distortion in the Lead part And Both Rhythm part,bur when i just changed form lead the rhythm and started to play the song,the music was quiter than in the normal Lead part,i don't know maybe the problem is just only with me.Somone shuld try to play all the 3 parts and say an oppinion i think.

Do you mean the rhythm guitar playing in the song itself is quiet, or the guitar tone used when playing in-game is quiet? EOF wouldn't be able to help with either of those problems.

The whole song is more quiet then the tones in the Rhythm parts.Then what can i do?

 

Well here it is :D  The Strat was my first electric guitar ever.Next there is my Fav.Les Paul ,I call it Veronika,because it's a beatuful name <3 i got it for my graduation from my elementary school(actually i paid the half of the guitar WTF),The third is a nice SG,i bouth it 3-4 months ago,it is quite haevy,and i just restringd recently and i have to set up the bridge(no idea how to start with) The Last one is a CAR guitar  :lol:  I got from 2014 christmas not so long after i started to play Rocksmith.Also there is a nonamed chineas crap guitar in the basemant,i got it from Praktiker DIY stores when i was about 5-7 years old.Don't ask me how did i got it from there,i have no idea XD.   

Whaaaaaat! Is your SG heavier than you Les Paul? My SG is the lightest guitar I've picked up.

 

Beleive it or not, it's true ! :O

Well here it is :D  The Strat was my first electric guitar ever.Next there is my Fav.Les Paul ,I call it Veronika,because it's a beatuful name <3 i got it for my graduation from my elementary school(actually i paid the half of the guitar WTF),The third is a nice SG,i bouth it 3-4 months ago,it is quite haevy,and i just restringd recently and i have to set up the bridge(no idea how to start with) The Last one is a CAR guitar  :lol:  I got from 2014 christmas not so long after i started to play Rocksmith.Also there is a nonamed chineas crap guitar in the basemant,i got it from Praktiker DIY stores when i was about 5-7 years old.Don't ask me how did i got it from there,i have no idea XD.    http://oi66.tinypic.com/2mwi6h3.jpg

1. EOF has no means of permanently altering the volume of the chart audio. You can change the playback volume for various things in "Song>Audio cues"

 

2. Select one or more notes and use your mouse scroll wheel or the [] keys to change their length.

 

3. If you are asking how to set the fret value of a note, you can select it and press F or N to access the dialog to type them in. There are many keyboard shortcuts for guitar arrangement authoring, make sure to check Help>Keys and the pro guitar tutorial in the help menu:

Ctrl+~ , Ctrl+#, Ctrl+Fn #, Ctrl+X:

 

Changes the fret number for all gems of all selected notes to 0 (Ctrl+~), 1 through 10 (Ctrl+1 through 0), or 11 through 22 (Ctrl+F1 through F12), or X (Ctrl+X, to denote string mutes).

 

Thanks,but if i can't change the volume then there is a problem,the lead part is fine with the music but in the 2 Rhythm part the song is quiet quiet LOL,or maybe the problem is only whit me i don't know sure , but anyone should try it and say an opinion,just to be sure https://www.dropbox.com/s/c4znawfpfc9dxvb/Godsmack_Changes_v1_0_p.psarc?dl=0

I'm so embarrassed for still have questions :D  Luckly,i'm not faild at Software Developing subject It's hard as hell(Why do i have to learn Free Pascal anyway? ) But nervermind,here are my question:

1) How can i set up the Volume of the music in EOF? I don't know how,but  in my not 100% finishd work has this problem,when i play the lead part it is normal,but when i play the Rhythm part or the Alt.Rhythm part the music is very low.

2) (I know i discused this before,)   How can i made the length of a sutain in EOF? Because when i reach that part where should be a sustain the part of it is missing.

3) How can i make a starting fret in EOF? (This is also have been discused before ,don't blame me pls : )  )

it looks like the profile you choose didn't had any custom tone saved to it. Since you have multiple profile save, you might have choosen the wrong one.

Oh yes how stupid i am thanks! Now theres only a few problem to take care of.

Right next to the name field in the explorer window you can change the filter for file. change it and you'll find the files.

Thanks!

Edit:now what is this? http://oi67.tinypic.com/rkvty1.jpg

http://i.imgur.com/95V3ovH.png

Not working,when i searced the folder it says there is no file in it(while importing)

http://oi68.tinypic.com/2jecphv.jpg

It's in the profile save located in steam/userdata/"whatevernumber"/221680/remote and it's the file ending with PRFLDB

gr8! And how can i import it into RS toolkit? Because those files have weird names and i didn't find any option to import it.

I made a custom tone in RS,but i don't know which folder contains the saved tone.Where is it?

@@raynebc - My guess would be that you slide out of the chord down towards the nut (unpitched slide to fret 2 or 3, say, to get your hand in position for the second chord), then play the second chord normally.

 

Anyway, in addition to what @@firekorn noted, the second chord should also be a half note rather than a dotted half note. Basically you dotted the wrong things.

And how so?  I doted the second to the first,or is there something i don't know? Also why should the second chord would be a half note?

 Edit: Nevermind.i think i got it,thanks guys as always!

i don't know what's the problem with this in guitar pro,can somone help?

http://oi64.tinypic.com/15h05k5.jpg

If you have a tab that does not import correctly, by all means report the problem. Otherwise try to keep in mind that not all tab is authored correctly, or have things that Rocksmith even supports, so just because it doesn't import the way you want doesn't necessarily mean it's a problem with EOF.

Well,last time i made some chages in one of my tab and when i imported into EOF the ghost notes in the intro wasn't ghost notes at all.Is this normal? http://oi64.tinypic.com/9ss09s.jpg

For me this is so much easier to fix directly in EoF, after you've imported the tab. There are ways to author most everything in GP and have it import reasonably well into EoF, but there will almost always have to be a small amount of streamlining required by the user in EoF.

 

Honestly, most of your questions about "Guitar Pro can't do this" or "Guitar Pro doesn't import correctly into EoF"... etc. are very easy to fix. You'd just need to get more comfortable authoring and editing in EoF. It may seem hard, but I assure you it isn't - and it will save you TONS of time and headaches.

 

I've literally never had a tab that imported perfectly. You'll always have to make one change or another, whether it's to note sustains, tech notes, adding arpeggios/handshapes. There's always something :D

I better like it to make it in gp,because it's much easier to handle than to do this in EOF.I admit,EOF does's not import most of the time the tabs correctly,but this depends on the GP tab itself too.(I had maybe 3 tabs wich was imported correctly)

I don't know how to do this 3.Also i'm not so sure about the bends part.Is this possible to make it or the picture that contains the bends in guitar pro is the same?And what can i do with the toggle manipulation part to look decent? (one picture shows in pg5 the legato slide part and the toggle manipulation)

http://oi67.tinypic.com/w7cz92.jpg

http://oi63.tinypic.com/aadmdx.jpghttp://oi67.tinypic.com/zt6o82.jpghttp://oi65.tinypic.com/t5oepj.jpg

So i can just put the cdlc in the dlc folder?

Of course.

@@ShrillBear52 well, use GP6 or export tabs from gpx to gp5 and open up in GP5 app should be fine

 

ninjad..

Yeah i did that,but i I don't think I will use gp6 again,it's such a mess.

GPx file (created by GP6 version) are impossible to load with Guitar Pro 5 that can only works with gp5, gp4 and gp3 file.

 

You can always download last version of tux guitar that can load gpx file and convert them to gp5 format for free or simply do your editing with tux guitar directly.

Yeah.go into tuxguitar,then import it into gp5.file and then open it in gp5,got it thanks it works!

How can in updat it? I used Guitar Pro 6 for a while,and there were things,that went wrong,so i went back to 5.But when i want to open an older guitar pro 6 tabs it says:To open this file,please update your guitar pro version.

I just downloaded Guitar Rig 5 and i wanted to create a tone wich has settings desttripcion and i have 3 questions:

1.)How can i set very specific settings for amp cabiant and etc.?

2.)How can i get back the numbers to see, ex:the master setting,wich is 7.5?

3.)How can i convert the saved tone to an XML. file?

Edit:i Solved the second question,here is the website what i found

I'm new to this and there's many thing that i have to know,Thanks!