November 12, 20179 yr Author The lyric import doesn't support UTF-8 encoding when multi-byte (ie. foreign or accented character) characters are present. UTF-8 with all standard ASCII characters (all characters are written as a single byte) would probably import fine. I wouldn't expect that the vocal count being wrong would cause any problems. If you can provide that file I can test with it.
November 13, 20179 yr @@raynebc remind me how can i have custom anchor length set for tapping or any other purpose ? like wide lane 5-8 frets wide instead of standard 4? or only manual edit left? Donate with PayPal Latest Toolkit build (PC) My Workshop \\\\ Amon Amarth Workshop (by Generalsnus) Tool Discography
November 13, 20179 yr Administrator @@alex36 you don't have control over the width of the highlight but it is define by what is needed to fill the space between the set FHP and the highest fretted note there. Firekorn's workshop In Flames Discography #FirekornHasDoneNothingForTheCommunity
November 13, 20179 yr @@firekorn I think this was improved since i checked, because it broke up for width of 4 back than, glad it smarter now :) Donate with PayPal Latest Toolkit build (PC) My Workshop \\\\ Amon Amarth Workshop (by Generalsnus) Tool Discography
November 13, 20179 yr Administrator @@Alex360 If you are talking about the automatic generation of FHP then you have to edit EOF.CFG to edit at which fret EOF will avoid changing the FHP if the note are more than 4 fret apart but that is far from perfect and shouldn't replace making FHP editing by hand afterward anyway. Firekorn's workshop In Flames Discography #FirekornHasDoneNothingForTheCommunity
November 14, 20179 yr Author firekorn's got it. The anchor width (ie. # of highlighted lanes) is determined automatically based on how far away from the current FHP (manually or automatically generated) a note goes. The config file edits mentioned change the FHP generation logic to allow you to define how far you want to consider "normal reach" at various positions on the fret board.
November 14, 20179 yr so this: [ https://ibb.co/kuDBF6 ]is how EOF comes up for me. only way to shut it down is via task manager. tried running as admin & non, dragging and dropping .wav & .gpx files. ---------- Current logs from when i just tried again: 457: Logging started during program initialization at 11/14/17 18:07:44457: EOF v1.8RC12 (10-17-2017)457: eof_load_config() entered457: set_default_config() entered457: eof_controller_read_button_names() entered457: eof_controller_read_button_names() entered457: Importing chord shape definitions457: eof_load_chord_shape_definitions() entered457: 54 chord shape definitions imported457: eof_set_display_mode() entered457: eof_window_create() entered457: eof_window_create() entered457: eof_window_create() entered457: eof_window_create() entered457: eof_window_create() entered457: eof_load_data() entered457: eof_init_colors() entered457: eof_switch_out_callback() entered457: eof_switch_in_callback() entered457: eof_switch_out_callback() entered457: create_silence_sample() entered457: save_wav() entered457: save_wav_fp() entered457: eof_switch_in_callback() entered457: eof_switch_out_callback() entered457: eof_copy_file() entered457: eof_switch_in_callback() entered457: eof_switch_out_callback() entered457: eof_undo_reset() entered457: Initializing audio457: eof_mix_init() entered457: eof_switch_in_callback() entered457: Checking for crash recovery files457: eof_switch_out_callback() entered
November 15, 20179 yr Author The only known cause for that in Windows is interference from antivirus software, such as if it is putting EOF in a sandbox or something like that. Try having your antivirus software trust the program so that it can run normally.
November 16, 20179 yr @@raynebc, can we have a syntax sugar for pickscrape slide in eof please? Just another type of slide to add.. usually it's trempick+unpitchedslide and I guess it has string mute sign(that white cross) I'm sure that's should be standardized already :) Donate with PayPal Latest Toolkit build (PC) My Workshop \\\\ Amon Amarth Workshop (by Generalsnus) Tool Discography
November 16, 20179 yr Administrator @@Alex360 no string mute. A pick slide is mostly done now with all the following status : 2 note on the same fret with the split statusIgnore to make sure it doesn't matter for scoresTap to indicate that it's the picking hand that should be usedTremolo statusUnpitch slide That's mostly based on their most recent display of pick scrape especially in Through The Fire And Flames by Dragonforce. Firekorn's workshop In Flames Discography #FirekornHasDoneNothingForTheCommunity
November 17, 20179 yr Author I suppose we'd need a consensus on what such a technique toggle function would add to best simulate pick scrape in-game. Some supplemental information like scrape direction would have to be prompted for, we'd have to decide whether the author has to specify the stop point of the slide, or if it will implicitly unpitched slide to fret 1 or fret 24 or something.
November 17, 20179 yr Administrator The really important status are the tap, tremolo and unpitch slide if you ask me, the rest can vary from chart to chart even on ODLC. As for the ending fret, it's a matter of length so it should be the user choice the same way the user work with unpitch slide on standard note. Firekorn's workshop In Flames Discography #FirekornHasDoneNothingForTheCommunity
November 18, 20179 yr Author I guess there are two approaches here: 1. EOF will have a new status to track pick slide, and during export will convert that to the several mentioned techniques. or 2. When pick slide status is applied to a note, it will just apply the several statuses immediately. I'd tend to think #1 is better overall, it just makes it less obvious to the author how it is implemented (if they don't read the changelog/manual).
November 18, 20179 yr Administrator I'm fine with the first option as it is, it will probably make things simpler for everyone and not everyone care about the underlying status behind this and a user that want to experiment could still make it manually if he wishes. Firekorn's workshop In Flames Discography #FirekornHasDoneNothingForTheCommunity
November 18, 20179 yr @@Alex360 no string mute. A pick slide is mostly done now with all the following status : 2 note on the same fret with the split statusIgnore to make sure it doesn't matter for scoresTap to indicate that it's the picking hand that should be usedTremolo statusUnpitch slide That's mostly based on their most recent display of pick scrape especially in Through The Fire And Flames by Dragonforce. Ooh, is that what that odd thing is in Goldfinger - 99 Red Balloons? Pick slide?
November 18, 20179 yr Administrator @@JustinAiken Yes it is. Firekorn's workshop In Flames Discography #FirekornHasDoneNothingForTheCommunity
December 9, 20178 yr Hey is there any way I could enable "note tails clickable" at vocal track, since It's viable! ? also can I remap hotkey for marking section from ctrl+m to ctrl+x ? only for vocal tracks hotkey, please? Donate with PayPal Latest Toolkit build (PC) My Workshop \\\\ Amon Amarth Workshop (by Generalsnus) Tool Discography
December 9, 20178 yr Author When I test it, the existing "Make note tails clickable" preference already works in the vocal track. Did you have something else in mind? Is there a benefit to changing the keyboard shortcut for marking the section? I could add CTRL+X as a second keyboard shortcut for it I suppose, but otherwise I probably wouldn't remove the existing CTRL+M shortcut because others are probably used to it. Let me know if this is close enough.
December 9, 20178 yr @@raynebc well I have razor keyboard with macros keys and I've mapped one at the shift position as ctrl+m hotkey and upper macros as ctrl+z so I'm covered for now but using regular keyboard you'll need 2 hands or good stretch to hit that combination (even with right control+ m way) along right shift like I'm paying octaves on pianoctrl+x is really good one it's near natural gamin position and ctrl+z is there and you can do it single hand easily :) and maybe I'm missing something but it seems it is, just missed it. I hate another bug when you select group of notes in vocals part click here click there and it transfer first note of the selection to the place you've clicked is there any purpose for this or is it a bug? Donate with PayPal Latest Toolkit build (PC) My Workshop \\\\ Amon Amarth Workshop (by Generalsnus) Tool Discography
December 10, 20178 yr Author Were you unable to reproduce a problem with the "Make note tails clickable" feature? As for the other issue you mentioned, can you clarify exact steps, ie. are you using CTRL+click or SHIFT+click? Are you clicking on the note head or the tail? I couldn't immediately reproduce this behavior, could you send me a sample project with the minimum steps needed to cause the problem?
December 10, 20178 yr @@raynebc, ok I'll try to do so.about notes tails: hmm it doesn't work without checking "tails" setting in vocals by default maybe there an override?I'll show you my eof file I'm playing withplus when nothing selected and you hold shift to select group of words it selects from the firstword till selected one weird, I'd expect it to be more like widnows does with the files, first one if not selected select one like with control then do things hmm to reproduce bug with clicking do:select group of notes on vocals trackholding shift click (at empty space) and drag to start of the song>it will move selected notes to some random place near your cursor to the leftthis is the reason why I never dragging any selected vocals lines since I can easily mess things uphope that helps! eof filehttps://drive.google.com/open?id=17NAUjmM0BtOdE1Pg7sqMBlhQpVLnEU6o Donate with PayPal Latest Toolkit build (PC) My Workshop \\\\ Amon Amarth Workshop (by Generalsnus) Tool Discography
December 10, 20178 yr Author about notes tails: hmm it doesn't work without checking "tails" setting in vocals by default maybe there an override?The "Make note tails clickable" preference is not enabled by default, so you would have to enable that in order to be able to select lyrics by clicking on their tails. Is this what you're referring to? I can reproduce the issues you described: 1. SHIFT+click on a note or lyric when no notes/lyrics are already selected causes that note/lyric to be selected in addition to all those before it. 2. After using mouse clicks to select one or more lyrics, SHIFT+clicking into empty space in the track can force the selected lyrics to be moved I'll try to fix those. I added CTRL+X as an additional shortcut to mark/remark lyric lines.
December 11, 20178 yr @@raynebc Is this what you're referring to?yess I'd like to have one on by default in lyrics, but it seems like it's not (since those lil notes so small I can't click it directly :( ) well could be another flag in config for those who' don't like it on vocals but I doubt.Great news then ;)I may end up hating less this "add lyrics" process in result! thank you :^3 Donate with PayPal Latest Toolkit build (PC) My Workshop \\\\ Amon Amarth Workshop (by Generalsnus) Tool Discography
December 11, 20178 yr Author Are there any others that would see a desire for separate vocal and non-vocal preferences for "make note tails clickable"? I wouldn't have thought that to be the case.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.