November 26, 201411 yr Author Even with that folder name, it works on my dev computer (Windows XP x64). However I did reproduce the problem on a Windows 7 x64 computer I tried. My dev computer is set to Japanese locale, but I don't know if that has anything to do with it. I'll try to see what I can find out, but it just may be a limitation with how Allegro works in Windows 7.
November 26, 201411 yr Author I did some more testing and can reproduce that problem on my dev computer if I compile with optimizations, so there is some kind of bug I need to track down.
November 27, 201411 yr Author Looks like some incorrect handling of Unicode strings. I'll go ahead and fix that, which means it will be less stable for people that use Unicode paths longer than 512 characters (hopefully unlikely?), but will work properly otherwise.
November 30, 201411 yr I found another GP import bug: http://puu.sh/cD5H2/a21d57b602.png/ss%20%282014-11-04%20at%2006.07.00%29.png As you can see, bar 161 imports correctly, but bar 162 is missing one chord. Also happens at bar 163 and bar 166. It also goes out of sync by a few bars around bar 166. I've uploaded the GP file here for you to look at: https://www.sendspace.com/file/bapkut.EoF file is here: https://www.dropbox.com/s/j76e1sgpfc8b12b/Mayan%20-%20Paladins%20Of%20Deceit%20%28Pro%29.eof?dl=0Accompanying .ogg file: https://www.dropbox.com/s/igpclk05gdbnikf/guitar.ogg?dl=0 I think I've found a similar bug. Looks like it has to do with non 4/4 time signatures. This one's a midi import bug though: http://puu.sh/dbMEd/2b967273a4.png/ss%20%282014-11-30%20at%2008.33.52%29.png Is getting imported as: http://puu.sh/dbMyX/197ca86197.png In short: time signature changes are not imported at the right bars, and there's a BPM change imported right before some of these time signature changes. It happens usually when going from 13/8 to 7/4, but not always. It's... random? The gp5 file is here: https://www.sendspace.com/file/el1bjpThe midi file is here (made from the gp5 file using guitar pro 6): https://www.sendspace.com/file/321n2b
December 1, 201411 yr Author I haven't forgotten about all these issues, I'm just backlogged lately and am keeping a list of things to fix.
December 11, 201411 yr Author Hi, folks. The latest hotfix (r1363) is in the first post. Changes are as follows: *Added a warning during save if any lyrics have extended ASCII or Unicode characters, as these aren't compatible with various rhythm games. *Removed the prompt asking the offset to be reset to zero during save, as it was determined to be unnecessary. *Removed usage of ustrncpy(), as EOF's strings and relevant logic are not taking Unicode character size into account and this causes buffer overflows when Allegro detects the string as being Unicode. *Added functions to a Note>Rocksmith>Handshape menu to mark a "handshape" phrase, which will export to RS2 XML similarly to arpeggios, but without the "-arp" on the chord name, so it can be made to look like a highlighted chord section with no chord name. The keyboard shortcut assigned to mark/unmark this phrase type is CTRL+SHIFT+H, and toggle pinch harmonic's shortcut has been changed to SHIFT+H.
December 11, 201411 yr Awesome thanks for your work on a much requested thing! I'll get to trying it out right away.
December 11, 201411 yr I'd like to avoid export fof related: notes.mid song.ini where I can disable this? :D Donate with PayPal Latest Toolkit build (PC) My Workshop \\\\ Amon Amarth Workshop (by Generalsnus) Tool Discography
December 11, 201411 yr Author EOF doesn't currently have a way to disable that. I suppose I could make it a toggle-able preference whether to export FoF style MIDI files, but nobody had asked for something like that before. Creating charts for Frets on Fire was EOF's original purpose. If you wanted to tweak the code yourself in the meantime, you can look at menu\file.c. In the eof_save_helper() function there's a call to eof_export_midi(). You can just comment out the entire if{} block involved with it and that should disable the FoF exports.
December 11, 201411 yr Just tested this change, works greatthank you :) Donate with PayPal Latest Toolkit build (PC) My Workshop \\\\ Amon Amarth Workshop (by Generalsnus) Tool Discography
December 11, 201411 yr Thanks very much for the handshape feature. This gives a much cleaner look ingame than arpeggios, very nice!Also, of course, thank you very much for the removal of the offset prompt. Awesome update :-) Check out my easy tutorial on how to add a metronome to your CDLC: Mute the original music, play only with the metronome and find out how good you really sound! Also: Find CDLCs that have the metronome enabled! Want a USB-Footswitch that you can use to control the tone selection and all the menus in Rocksmith? Check out Rodman's Tutorial and my additions to that! My CDLCs: Devin Townsend - Life, Deep Peace, Ih-Ah!, Deadhead; Farin Urlaub - OkMy ideas for new features in Ignition, e.g. filters for Multitrack CDLC and Metronome CDLC.
December 11, 201411 yr Now if there was a way to force RS to display a chord name, even when there is no chord, at the beginning of these handshape features... I know you can get phantom chord boxes from arpeggios, but I hate arpeggios in RS14 - they are more confusing than they are helpful. A nice highlighted chord section (as per your update) with a chord name at the beginning (with no chord box) would be fkn awesome, and something I think Ubi should introduce to the next iteration of RS. And thanks for your continued support, it means a lot to us man :D
December 12, 201411 yr Author If anybody does any tinkering and finds a way to get it to display with a chord name without displaying like a normal arpeggio, let me know.
December 15, 201411 yr Had a weird bug, on Free Speech for the dumb, when I imported the guitar pro file.. it changed all the bend strengths to double what they were in the guitar pro file. 1 became 2, 2 became 4 and 3 became 6. Also did the same on all the tech note bends. My Customs Projects! Metallica DIscography Project! My CDLC Tutorial My Youtube Channel My Raptr Profile My Twitch TV Channel Member of the Classic Rock Coalition
December 17, 201411 yr When a bend gets imported with tech-notes (which is great), the regular note is still marked as a bend.Therefore on save you get the warning "one bend doesn't define it's bend strength" for all those bends.I have to go through all the bends and toggle off the bend. Would it be possible to import tech-note enabled bends without the regular (undefined) bend strength in the first place? Regards,Azrael Check out my easy tutorial on how to add a metronome to your CDLC: Mute the original music, play only with the metronome and find out how good you really sound! Also: Find CDLCs that have the metronome enabled! Want a USB-Footswitch that you can use to control the tone selection and all the menus in Rocksmith? Check out Rodman's Tutorial and my additions to that! My CDLCs: Devin Townsend - Life, Deep Peace, Ih-Ah!, Deadhead; Farin Urlaub - OkMy ideas for new features in Ignition, e.g. filters for Multitrack CDLC and Metronome CDLC.
December 17, 201411 yr Is this new with r1363? I have only made one song so far using it and there were no bends... The regular note has always had a bend definition (as well as tech note) but I only get that warning when there is a genuine error. I think one or more of your tech notes are effecting the non bend notes directly after them. Tech notes can be quite a mess on import and sometimes they hide underneath each other. In complex solo they can snap onto the noext note (which is not a bend) and I think this is what caused the message on save. I have actually started erasing a lot of tech notes in complex solos (Stairway to Heaven Live) because I cannot zoom in and get them where I want/need them. The old logic still works - if the normal note has a bend but there are no tech notes on the bend then the bend is defined as 1/3 of the way into the sustain. Much easier to do it this way for rapidly repeating bend notes, or even a series of prebends (just have the sustains as length 1). Out of interest, if anyone wants to see the handshape feature in action http://customsforge.com/page/customsforge_rs_2014_cdlc.html/_/pc-enabled-rs-2014-cdlc/homesick-r10293
December 17, 201411 yr Well, the thing I am talking about is quite easy to reproduce, even without importing anything:Put a note somewhere Ctrl+B to toggle bend on, hit enter without setting any value Save -> error: "one bend doesn't define it's bend strength" Put tech note bends in the sustain of the note above Save -> error: "one bend doesn't define it's bend strength" Ctrl+B to toggle bend of regular note off Save -> no errorsMy assumption is that on import EOF does steps 1,2 and 4. It would be better if only 1 and 4 were done. Check out my easy tutorial on how to add a metronome to your CDLC: Mute the original music, play only with the metronome and find out how good you really sound! Also: Find CDLCs that have the metronome enabled! Want a USB-Footswitch that you can use to control the tone selection and all the menus in Rocksmith? Check out Rodman's Tutorial and my additions to that! My CDLCs: Devin Townsend - Life, Deep Peace, Ih-Ah!, Deadhead; Farin Urlaub - OkMy ideas for new features in Ignition, e.g. filters for Multitrack CDLC and Metronome CDLC.
December 17, 201411 yr Author It's expected that if the note is marked as a bend but has no bend strength formally defined that this warning would be given. Guitar Pro files are supposed to give a summarized bend strength though, so maybe this value isn't provided by the author. If you can provide that GP file I can check it out.
December 18, 201411 yr The warning is of course very useful, I'm not doubting that! Maybe the problem is with TuxGuitar?Even the simplest example produces the same result. I opened a new file and inserted one bend and one prebend:https://dl.dropboxusercontent.com/u/8722253/Rocksmith%20CDLC/bendtest.gp5They both get imported without the summarized bend strength. Thanks! PS: While you're at it: I've added a tremolo picked note to the file, because the tremolo is not imported, too. Check out my easy tutorial on how to add a metronome to your CDLC: Mute the original music, play only with the metronome and find out how good you really sound! Also: Find CDLCs that have the metronome enabled! Want a USB-Footswitch that you can use to control the tone selection and all the menus in Rocksmith? Check out Rodman's Tutorial and my additions to that! My CDLCs: Devin Townsend - Life, Deep Peace, Ih-Ah!, Deadhead; Farin Urlaub - OkMy ideas for new features in Ignition, e.g. filters for Multitrack CDLC and Metronome CDLC.
December 18, 201411 yr Author I've fixed the bend issue, it will now determine the bend strength for the base note automatically. As for the tremolo status, it actually is being imported, but the documented behavior of Guitar Pro import when the "GP import replaces active track" preference is disabled is to make the tremolo phrase difficulty-specific (instead of applying to all difficulties). This does mean that the tremolo phrase will only be visible if you remove the track's difficulty limit. This is a bit confusing, but it's the best balance I could come up with since for Rocksmith, each difficulty needs to have its own tremolo statuses independent of other difficulties, and this is the opposite of how tremolo phrases work in Rock Band 3 (apply to all difficulties). I did fix some other tremolo GP import issues just now though.
December 20, 201411 yr Discussing the custom inlay problem (sometimes on/sometimes off) I was wondering if there is any kind of maxfret value in the XML export of arrangements from EoF? I presume that EoF imports the maxfret value of the GP guitar track from GP? Just wondering if the same value is exported somehow... I think that the inlays don't load, and hence cause arrangement freezes with new arrangements numbers (new customs), because it is trying to load a 24 fret inlay onto something which the game is being told is <24 frets. Also might explain why sometimes the inlays don't load.
December 20, 201411 yr Author There's no XML value I'm aware of that indicates the highest used fret number in the arrangement. Internally, EOF has a default maximum fret value for each of the pro guitar/bass tracks, but it will adjust them automatically when a Guitar Pro file is imported.
December 23, 201411 yr Ever since I got this latest update riff repeater doesnt work in my customs. When I choose a section to practice and hit start riff repeater it loads the section but its paused and not moving and then it goes warp speed through the song to that section and then pauses again. Does anyone have any idea what could cause that?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.