Right now I am going from Guitar with RT cable to my PC and then PC to TV via HDMI. I would like to go from guitar with 1/4" cable to splitter, then RT cable to PC and the other cable to my amp.

 

Any ideas on the best way to do this?

 

Thx for any help.

After using a cheap Y-splitter cable for a while, I moved on to a Fender ABY switch and haven't looked back:

 

https://www.amazon.co.uk/Fender-Switch-Between-Guitars-023-4506-000/dp/B00HQXUH5W

 

I did some shopping around and I think I paid about £25 for it.

 

Don't forget you will need some extra cables! :D

Thx, I'll try it out.

Thx, I'll try it out.

Yep , I gotta Fender ABY too , depending on the electrics in your house and equipment you use ( i.e amp & pedals ) you may get ground loop but I just drown it out with louder volume ( my neighbours love me - not )

with a cheap splitter, you may loose sound quality through the amp, especially on the high frequencies

Radial BigShot ABY pedal.  

I'd recommend this kind of setup.

 

http://i.imgur.com/ljC0u63.png

I'd recommend this kind of setup.

 

 

There's something very wrong in that diagram.

 

 

 

 

 

Way too many strings. ;)

Try this.

 

https://www.reddit.com/r/rocksmith/comments/3hdnte/how_to_get_rocksmith_and_your_amp_working/

@@missis sumner

 

You spotted the deliberate mistake. :)

@@missis sumner

 

You spotted the deliberate mistake. :)

 

Why the ABY Switcher, when the wireless base unit has two outputs ?

 

 

Why the ABY Switcher, when the wireless base unit has two outputs ?

 

 

Mainly for ground loop isolation. Also, the XLR is line level output so no good if your amp doesn't support that. But it might be an option for some people. 

XLR Line level is ok to send the signal to my Firehawk FX,

The other output could be used for the RS Cable.

I hope if used together, signal quality will not be weakened,

because that would really spoil the tones on the Firehawk.

 

I currently use the FX Send of the Firehawk FX to connect the RS Cable,

but I have to configure all my tones with a "FX Send" first in line.

 

Wireless Guitar without needing the FX Send would improve my configuration.

XLR Line level is ok to send the signal to my Firehawk FX,

 

@@TomSawyer2112

Are you sure that will work? 

 

https://line6.com/data/6/0a06439c53ca5744bbfd97ba5/application/pdf/Relay%20G10%20(Rev%20B)%20-%20English%20.pdf