Jump to content
  • 0

Link Next Unpitched Slide


CommandoAir

Question

I'm making a custom, and it's all going good except for one thing:

 

The song ends with a slide out downwards. The first time around, I just charted it as one big un-pitched slide, but there's a small vibrato sustain before the note actually starts sliding out, and it isn't re-picked.

 

I've got it charted as so:

 

D String 16th fret (vibrato + link next) → Un-pitched slide to 0 

 

The problem is, this shows the first note (the vibrato) fine, but the slide at the end doesn't show up at all.

 

Surely it's possible to link next to an un-pitched side. I'm sure I've seen cases where it would have been impossible without it. Am I doing something wrong? Or is this just a bug?

 

If needed, I can post screenshots and/or the _p.psarc file.

Link to comment
Share on other sites

13 answers to this question

Recommended Posts

  • 0

Change it to this and see if you like it:

 

D String 16th fret (vibrato + link next) → D String 16th fret with unpitched slide to 1 (don't forget to add a bit of length to this note with the ] key or mouse scroll up)

Didn't work, I also tried setting it to 2.

 

I'd like to make a correction, it doesn't show an open note as the slide note, it just doesn't show the note at all.

Link to comment
Share on other sites

  • 0
  • Administrator

Do you use DDC? If so can you share the result without using it?

 

Also the crazy status on the note isn't needed and i wouldn't recommend to have the vibrato status on the slide since i doubt any guitarist ever do both at the same time but it shouldn't cause any issue.

Firekorn's workshop
In Flames Discography

#FirekornHasDoneNothingForTheCommunity

Link to comment
Share on other sites

  • 0

Do you use DDC? If so can you share the result without using it?

 

Also the crazy status on the note isn't needed and i wouldn't recommend to have the vibrato status on the slide since i doubt any guitarist ever do both at the same time but it shouldn't cause any issue.

I don't use DDC

Removed crazy note, I don't know how that got there

Vibrato removed, didn't really think about that when I put it on

 

Still the same issue. No note shows.

 

Edit: I just tried a work-around where I terminated the first sustain note with another link next note (without vibrato) but that just put an open note with a tiny sustain tail on the end.

 

As a side note, scroll speed in the RS toolkit doesn't seem to make a difference either.

Link to comment
Share on other sites

  • 0

 

Do you use DDC? If so can you share the result without using it?

 

Also the crazy status on the note isn't needed and i wouldn't recommend to have the vibrato status on the slide since i doubt any guitarist ever do both at the same time but it shouldn't cause any issue.

I don't use DDC

Removed crazy note, I don't know how that got there

Vibrato removed, didn't really think about that when I put it on

 

Still the same issue. No note shows.

 

Edit: I just tried a work-around where I terminated the first sustain note with another link next note (without vibrato) but that just put an open note with a tiny sustain tail on the end.

 

As a side note, scroll speed in the RS toolkit doesn't seem to make a difference either.

 

 

Scroll speed speed should be noticeable.  Change it to 0.8 and it SHOULD be super fast.

Link to comment
Share on other sites

  • 0

 

 

Do you use DDC? If so can you share the result without using it?

 

Also the crazy status on the note isn't needed and i wouldn't recommend to have the vibrato status on the slide since i doubt any guitarist ever do both at the same time but it shouldn't cause any issue.

I don't use DDC

Removed crazy note, I don't know how that got there

Vibrato removed, didn't really think about that when I put it on

 

Still the same issue. No note shows.

 

Edit: I just tried a work-around where I terminated the first sustain note with another link next note (without vibrato) but that just put an open note with a tiny sustain tail on the end.

 

As a side note, scroll speed in the RS toolkit doesn't seem to make a difference either.

 

 

Scroll speed speed should be noticeable.  Change it to 0.8 and it SHOULD be super fast.

 

Ah! I was under the impression higher number means faster. I'm pretty sure there's even a multiplication symbol in there.

Link to comment
Share on other sites

  • 0
  • Administrator

@@CommandoAir oh indeed, didn't think about this.

 

It might be related to what cause the chord glitch issue see there : http://customsforge.com/topic/37422-weird-graphical-error-with-chord-diagrams-on-rs2014/

Firekorn's workshop
In Flames Discography

#FirekornHasDoneNothingForTheCommunity

Link to comment
Share on other sites

  • 0

Updated to RS toolkit 2.8, and EOF 1.8RC12, but still the same issue. 

 

Those threads mentioned something about Abridged_RS2 causing graphical issues, but I didn't see anything to do with that in the Import/Export menu like it said.

 

Also, the EOF post mentions something about tech notes and unpitched slides. Maybe instead I have to use a single, unpitched slide note, and use the tech mode to set where it starts the slide? I don't know, I've never used tech view.

Link to comment
Share on other sites

  • 0
  • Administrator

@@CommandoAir are you sure you also applied the latest hotfix (second link there customsforge.com/topic/1529-latest-eof-releases-5-3-2017/ )

 

And for the toolkit it's strongly suggested to use the beta release instead of the stable one right now.

Firekorn's workshop
In Flames Discography

#FirekornHasDoneNothingForTheCommunity

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. - Privacy Policy